Summary
|
Products
Sedecal
High-Frequency X-Ray Generator
Model: Battery X-Ray Generator
Description
Sedecal's Battery X-Ray Generators enable operation without connection to the room mains power due to its strong energy storage capacity and highly efficient electronics. They feature automatic line compensation technology to allow normal operation in cases where a line generator cannot. They can be operated in single-phase environments and are available in 32Kw. 40Kw and 50kw power outputs.
Request Information
Request Price/Quote
Features
• High-frequency generator, 1 tube operation (Optional: two tubes).
• Single-phase generator 220/240 VAC 8/16 A, 50/60 Hz.
• Microprocessor controlled with auto diagnostic and error code indication for easy maintenance.
• Configurable console in “Windows” environment.
• Self-diagnosis indicators identify malfunctions in the system. With intuitive error code indication for easy maintenance.
• Tube protection circuitry prolongs Tube life and increases system performance.
• Five workstation connection capacity, maximum.
• Automatic line compensation: 100/110/208/220/240 VAC ±10 %.
• Equipped with closed loop control of X-ray Tube current, kVp and filaments, which minimize potential errors and the need for readjustments.
• Automatic line voltage compensation due to closed loop operation of X-ray Tube current and kVp.
• Independent Heat Unit storage for each X-ray Tube, even after turning On/Off the equipment.
• Hand switch for preparation and exposure control.
• Light and sound indications for X-ray exposure.
• Liquid crystal screen for anatomical program and messages.
• Four independent visuals for reading for radiographic parameters.
• X ray tube overload protection.
• X-Ray tube H.U available indication and continue monitoring for x-ray tube protection.
• Control of X-ray Tube Number of Exposures.
• Anatomical Programmer (APR) for six patient sizes (three adults and three children), with pre-programmed anatomical views for automatic selection. The operator may introduce modifications manually in all the original APR techniques and store them for later use.
• RAD operation Modes 0,1,2 & 3 points:
• Three point control: Selecting kVp, mA and Exposure Time independently.
• Two point control: Selecting kVp and mAs independently. mAs selection sets the maximum Available for the selected Focal Spot and the respective Exposure Time. In this control mode, when kVp value is increased, the Generator will automatically look for the adequate combination of mA and Exposure Time factors to avoid the “Tube Overload” warning, keeping constant mAs.
• One point control: Selecting kVp with AEC operations.
• Zero point: Anatomical Programs (APR).
• Single-phase generator 220/240 VAC 8/16 A, 50/60 Hz.
• Microprocessor controlled with auto diagnostic and error code indication for easy maintenance.
• Configurable console in “Windows” environment.
• Self-diagnosis indicators identify malfunctions in the system. With intuitive error code indication for easy maintenance.
• Tube protection circuitry prolongs Tube life and increases system performance.
• Five workstation connection capacity, maximum.
• Automatic line compensation: 100/110/208/220/240 VAC ±10 %.
• Equipped with closed loop control of X-ray Tube current, kVp and filaments, which minimize potential errors and the need for readjustments.
• Automatic line voltage compensation due to closed loop operation of X-ray Tube current and kVp.
• Independent Heat Unit storage for each X-ray Tube, even after turning On/Off the equipment.
• Hand switch for preparation and exposure control.
• Light and sound indications for X-ray exposure.
• Liquid crystal screen for anatomical program and messages.
• Four independent visuals for reading for radiographic parameters.
• X ray tube overload protection.
• X-Ray tube H.U available indication and continue monitoring for x-ray tube protection.
• Control of X-ray Tube Number of Exposures.
• Anatomical Programmer (APR) for six patient sizes (three adults and three children), with pre-programmed anatomical views for automatic selection. The operator may introduce modifications manually in all the original APR techniques and store them for later use.
• RAD operation Modes 0,1,2 & 3 points:
• Three point control: Selecting kVp, mA and Exposure Time independently.
• Two point control: Selecting kVp and mAs independently. mAs selection sets the maximum Available for the selected Focal Spot and the respective Exposure Time. In this control mode, when kVp value is increased, the Generator will automatically look for the adequate combination of mA and Exposure Time factors to avoid the “Tube Overload” warning, keeping constant mAs.
• One point control: Selecting kVp with AEC operations.
• Zero point: Anatomical Programs (APR).
Request Information
Request Price/Quote
Portable Radiography System
DRAGON HC
X-Ray Tube Overhead Support System
NOVA
Portable X-Ray Unit
SPL-HF-4/8
Mobile X-ray Unit
Easy Moving Plus
Portable X-Ray System
Dragon X SPSL
Ceiling Suspension X-Ray System
Challenge X
Portable DR system
DIGITAL DRAGON LW
High Frequency X-Ray Generator
SHFR
More products